Kawasaki Teryx KRX 1000 6" Portal Gear Lift

Choose a six-inch KRX portal configuration

Start with your two-seat KRX 1000 or four-seat KRX 4 1000, then compare the available reduction and idler combinations. These SuperATV GDP packages combine six inches of portal lift with reduction at the wheel hubs. Housing material and the frame-stiffener selection are separate choices; use the full configuration when comparing packages.

Available package combinations

• 30% (2-seat, Dual idler)
• 30% (2-seat, Single idler)
• 30% (4-seat, Dual idler)
• 30% (4-seat, Single idler)
• 45% (2-seat, Dual idler)
• 45% (2-seat, Single idler)
• 45% (4-seat, Dual idler)
• 45% (4-seat, Single idler)
• 60% (2-seat, Dual idler)
• 60% (4-seat, Dual idler)

Supplier-listed vehicle ranges

Two-seat Kawasaki Teryx KRX 1000: 2020–2025. Four-seat Kawasaki Teryx KRX 4 1000: 2023–2025. Select the correct seating layout; these ranges do not establish compatibility with later years or unlisted configurations.

Wheel and installation requirements

• Use wheels at least 18 inches in diameter.
• 18-inch wheels must have no more than 4.5 inches of backspacing; wheels 20 inches and larger must have no more than 5 inches.
• Wheel center holes must be at least 3.25 inches (82.55 mm), or a 1-inch wheel spacer is required.

Check wheel dimensions before ordering. Portal kits and wheel spacers are separate decisions; do not assume a required spacer is included in the selected package. Retain and follow the manufacturer’s installation instructions.